V4DR 4.5″ Vandal-Resistant Downlight – Round
Features
- Ideal for schools, behavioral health facilities, correctional institutions, and other vandal-prone areas
- Anti-ligature design with tamper-resistant fasteners
- Accepted by the New York State Office of Mental Health for use in inpatient facilities
- IP65-rated die-cast trim includes easy-to-clean flush lens
- Beam angles ranging from 25° narrow to 50° wide for tailored performance
- 4 inch aperture is unobtrusive in small scale spaces
- Die-cast trim choices include flush or regressed lens
- Contemporary design provides glare-free illumination for a soft ceiling appearance
- Easily adjust mounting arms below ceiling to adapt to a range of ceiling thicknesses
- Low UGR meets LEED and WELL requirements
- Deliver scalable, data-driven smart buildings with PoE-enabled fixtures and controls
- Support human-centric design with adaptive, individualized lighting using tunable white light
- Mimic the comfortable, welcoming glow of incandescent with warm-dimming technology
- Buy American Act compliant
- Wireless in-fixture control solutions available
- Made Right Here® in the USA
Tools
Estimate fixture quantities and light levels.
Configure fixtures and streamline the ordering process.
Use your zip code to find your local agent.
Specifications
|
Housing |
Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 1-7/8″ max. TC option required for ceiling thicknesses greater than 1-1/4″. |
|
Lensed Trim |
Die-cast aluminum frame with 1/8” micro-prismatic, polycarbonate lens with 1/8” clear polycarbonate underlay. Trim is secured with four stainless steel, tamper-resistant screws. |
|
Electrical |
High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. |
|
Mounting |
Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Minimum 24″ O.C. marked spacing required for L34 and L37 lumen packages. |
|
Listings |
• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. |
|
Warranty |
5-year limited warranty, see details |
|
Housing |
Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 1-7/8″ max. TC option required for ceiling thicknesses greater than 1-1/4″. |
|
Lensed Trim |
Die-cast aluminum frame with 1/8” micro-prismatic, polycarbonate lens with 1/8” clear polycarbonate underlay. Trim is secured with four stainless steel, tamper-resistant screws. |
|
Electrical |
High-performance Class 2 LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>50,000 hours. Low-voltage DC fixture, to be fed by Class 2 power supply. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses. |
|
Mounting |
Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. |
|
Listings |
• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. |
|
Warranty |
5-year limited warranty, see details |
|
Housing |
Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 1-7/8″ max. TC option required for ceiling thicknesses greater than 1-1/4″. |
|
Lensed Trim |
Die-cast aluminum frame with 1/8” micro-prismatic, polycarbonate lens with 1/8” clear polycarbonate underlay. Trim is secured with four stainless steel, tamper-resistant screws. |
|
Electrical |
High-performance Class 2 LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>50,000 hours. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses. |
|
Mounting |
Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. |
|
Listings |
• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. |
|
Warranty |
5-year limited warranty, see details |
|
Housing |
Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 1-7/8″ max. TC option required for ceiling thicknesses greater than 1-1/4″. |
|
Lensed Trim |
Die-cast aluminum frame with 1/8” micro-prismatic, polycarbonate lens with 1/8” clear polycarbonate underlay. Trim is secured with four stainless steel, tamper-resistant screws. |
|
Electrical |
High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. |
|
Mounting |
Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. |
|
Listings |
• cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for dry and damp locations. LED light assembly conforms to UL 2108 for remote installation. |
|
Warranty |
5-year limited warranty, see details |
Downloads
Reflector Finishes
Black
White
Clear Semi-Spec
Compatible Controls
Inspiration
